Upper Tool Tray Bolt on - Harbor Freight 20 Ton Press
****Confirm your press frame model has upper bolts. If not the tray will not be able to be attached without further modifications****
This is a great accessory to the Harbor Freight 20 Ton Press. This upper tray makes a convenient storage tray for tools or parts on top of the Harbor Freight 20 ton press. Tray comes formed and TIG welded ready to install. Comes with (4) mounting brackets and install hardware.
This attaches onto the upper frame hardware. Remove upper bolts on both sides of the press. Center the tray on top of the press, remove the upper bolts and place the 4 tabs up against the side of the frame. Assemble the hardware and mounting tabs. Ships raw, recommend painting or coating with a rust inhibitor.
Made from 14g cold rolled steel
Proudly Made in the USA
****Confirm your press frame model has upper bolts. If not the tray will not be able to be attached without further modifications****
This is a great accessory to the Harbor Freight 20 Ton Press. This upper tray makes a convenient storage tray for tools or parts on top of the Harbor Freight 20 ton press. Tray comes formed and TIG welded ready to install. Comes with (4) mounting brackets and install hardware.
This attaches onto the upper frame hardware. Remove upper bolts on both sides of the press. Center the tray on top of the press, remove the upper bolts and place the 4 tabs up against the side of the frame. Assemble the hardware and mounting tabs. Ships raw, recommend painting or coating with a rust inhibitor.
Made from 14g cold rolled steel
Proudly Made in the USA
****Confirm your press frame model has upper bolts. If not the tray will not be able to be attached without further modifications****
This is a great accessory to the Harbor Freight 20 Ton Press. This upper tray makes a convenient storage tray for tools or parts on top of the Harbor Freight 20 ton press. Tray comes formed and TIG welded ready to install. Comes with (4) mounting brackets and install hardware.
This attaches onto the upper frame hardware. Remove upper bolts on both sides of the press. Center the tray on top of the press, remove the upper bolts and place the 4 tabs up against the side of the frame. Assemble the hardware and mounting tabs. Ships raw, recommend painting or coating with a rust inhibitor.
Made from 14g cold rolled steel
Proudly Made in the USA
